Sieve bend screen has abrasion resistance and corrosion resistance.
Materials:
Solve the problems of industrial dehydration, slurry feeding, and wastewater treatment.The sieve bend screen is widely used in industry.When the material flows on the surface, it has more force on the screen than on the flat wedge line screen, with better shielding performance compared to the flat screen.
45 DSM screening-typically used for thickening and screening.
120 DSM sieve-pulp thickening, recycling, and fiber separation.
800mm arc length-media recovery.Limit the use at the height of the one.
1600mm arc length-for maximum drainage.
1200mm arc length-maximum drainage, but height not allowed 1600mm
| NAME | WIDTH in / mm | HEIGHT in / mm | SECTION AREA in2 / mm2 | ANGLE |
| 20 | 0.020 / 0.508 | 0.040 / 1.016 | 0.005 / 0.323 | 11 |
| 30 | 0.030 / 0.762 | 0.050 / 1.270 | 0.001 / 0.645 | 13 |
| 47 | 0.047 / 1.194 | 0.088 / 2.235 | 0.003 / 1.935 | 10 |
| 63 | 0.060 / 1.524 | 0.100 / 2.540 | 0.004 / 2.581 | 13 |
| 69 | 0.071 / 1.803 | 0.177 / 4.496 | 0.010 / 6.452 | 7 |
| 93 | 0.089 / 2.261 | 0.138 / 3.505 | 0.009 / 6.806 | 13 |
| 118 | 0.116 / 2.946 | 0.185 / 4.699 | 0.015 / 9.677 | 13 |
| 130 | 0.130 / 3.302 | 0.250 / 6.350 | 0.023 / 14.839 | 8 |
| 158 | 0.158 / 4.013 | 0.239 / 6.070 | 0.028 / 17.94 | 8 |
| 191 | 0.195 / 4.953 | 0.363 / 9.220 | 0.055 / 35.484 | 5 |
| NAME | WIDTH IN. | HEIGHT IN. | SECTION AREA IN. | SECTION MODULUS |
| 29 | .029 | .102 | .003 | .037 |
| 63 | .060 | .100 | .004 | .050 |
| 93 | .089 | .138 | .009 | .150 |
| XJR | .089 | .189 | .013 | .298 |
| 60SR | .060 | .120 | .006 | .084 |
| 156 | .151 | .217 | .022 | .600 |
Characteristic:
Wedge line minimum line diameter: 0.5mm (width) x1.2mm (height) The opening area is determined by the wedge line width and gap size. When the groove size is determined, a thinner wedge line can only be used to increase the opening rate.
The lateral strength is large. If the lateral strength is not sufficient, the sieve bend (DSM) sieve bends to the side, and the clearance accuracy changes.
High vertical strength is more important than horizontal strength and is an important factor affecting product performance.
abrasion resistance and corrosion resistance, we choose the best raw materials and special surface treatment techniques that can improve product wear resistance and corrosion resistance, long service life.
Custom wedge angle (reasonable water cut design) with diagonal has better shielding in use.We can customize this angle: 3-15. The size of the angle depends on the width of the wedge line and the size of the gap, and our technicians will provide the most professional advice.
The size of the angle depends on the width of the wedge line and the size of the gap, and our technicians will provide the most professional advice.
Solid structure, perfect welding process, welding each intersection points, the structure is very strong.
Easy to install, easy to replace, without maintenance
Save money on energy, space, and noise
The application environment of different angle wedge wire sieve net is different.45 Screening: Thickening screen
120 Screening sieve: widely used in paper mill, grouting and recycling fiber.Before purchasing, confirm with the supplier: material, wedge line size, gap size, length and width, angle, etc.
Application:
Packages
The Delivery
Please Meet us on The http://www.wedgefilter.com
